TCL company provides excellent tv on a low budget. Due to this, it has been kept buzzing in the market for some time now. Because it provides high-quality tv on a low budget, and this tv also has a good lifespan. But any TV is not perfect, after a few days some problem is bound to occur in it. One such problem is your TCL tv not turning on. So what should you do?
There can be many reasons for the tv not turning on. There may be some kind of malfunction in the component inside the TV. TV can also be damaged due to an increase or decrease in power. Or the mains plug connecting the tv could also be the problem.
If your TCL tv is also not turning on, check that all cables connected to it are properly fixed in place. You can then power cycle the tv, unplug it and let it sit for at least 1 to 2 minutes. Meanwhile, press and hold the power button of the TV. Now plug in the tv and check if it works or not, and if not then press the reset button on the back of the tv.
All this but if the TV does not turn on, then you do not need to panic or get confused. Apart from this, there are other solutions. With the help of this, you can fix your problem without buying a new TV.
Suggested Read: TCL TV Light Blinking | Quick and Easy Solution
What Can You Do If TCL TV Won’t Turn On?
First of all, you don’t need to be afraid or panic. Often you can fix this problem without the help of any technician. That confidence needs to be there, and just a few points to consider below.
Check All the Cord Connections Connected to the TV
The first and most important step is to check whether the power cord of the TV is properly connected to the TV and if not, fit it properly. If you are running the tv using an extension board, avoid using it and plug it directly into the wall outlet and switch on the tv.
When you check each cord in the back of the TV, we recommend that you disconnect each cord first and then fix it properly in a bright place. By doing this there is no possibility of a loose connection.
Pay more attention to the HDMI connected to your TV as most of the problems occur with it. Now turn on your TCL TV. If your TCL TV still does not turn on. So don’t worry use the next steps.
Check If Your TCL TV Remote Is Working
You have checked that each cord is properly fixed as per the steps mentioned above. Then you must have checked that both ends of the HDMI connection are properly connected. So now try to turn on the tv from the remote, and if the tv doesn’t turn on then you can use the physical button.
If the tv turns on using the physical power button on the tv, then the problem is definitely with your remote. To check the problem in the remote replace the battery of the remote and see if it works. If your old remote doesn’t work, you can consider buying a new remote, or if you have another TCL TV in the house, you can also use its remote. But it needs to be compatible with your tv.
According to us, you can buy new remotes from below. Which will be useful to you.
If your TCL tv still does not turn on then you can use the next steps.
Suggested Read: How to Turn on TCL TV Without Remote?
Power Cycle The TCL TV
Finally, you can power cycle the TV once before taking it outside for repair. Power cycling also drains the residual energy in the tv and the tv starts up very fresh.
To power cycle the TCL TV you need to take the following steps
- First, you disconnect the TV from its mains and plug in the wall.
- Now you press the power button on the TCL TV. Remember to press the power button of the TV, not the remote.
- Press and hold the power button for at least 1 to 2 minutes. By doing this, all the energy of the capacitor will be drained.
- Now plug the tv back in and turn it on.
- Now you will definitely succeed in turning on the TV like before.
If the tv does not turn on even after the power cycle then you can factory reset the tv.
Factory Reset Your TCL TV
All TCL TVs available in the market have a status light at the bottom-middle of the bezel. Whether this light is on, off, or blinking is used to indicate the current status of the TV.
This status light should blink when you turn on the TV using the remote. Blinking indicates that it is receiving a signal from the remote. If the status light blinks when you press the on button on the remote, but the TV does not turn on, then you should take the following steps in such a situation.
- First of all, you find the reset button on the back of the TV. You will usually find it around the USB port or HDMI port.
- Now use a pin or paper clip that can go through the small hole. Now press and hold this button for at least 30 to 50 seconds.
- Now your tv is factory reset. Now you can try to turn it on. Note that you will need to re-login to all streaming accounts before the TV resets.
Select the Correct Input Sources
Sometimes it can also happen that you have selected the wrong input in the TV. Because whenever you select the wrong input sources, your tv won’t turn on. Your tv needs correct input to turn it on. When you’re using an extra streaming device like a Roku or any other cable box or DVD player, check not once but twice that the input source you’re using matches the HDMI port.
Here we are going to show you a method by which you can choose the right input sources.
Method 1: Select the correct input sources using the remote control.
- First, you turn on the TV using the power button.
- Now press the source button on the remote control.
- You will see all modes of tv. Select the mode as desired.
Method 2: Change the input source without the remote.
- First, you have to switch on the tv.
- Now you have to press the menu button using the button on the TV.
- Use the volume buttons to navigate to the source option.
- Press the MENU button to select the desired input source.
Suggested Read: How to Change Input on Roku TV? | The Definitive Guide
Use a New Power Outlet
Sometimes the plug can also be responsible for the tv not turning on, but everyone works under the assumption that my plug is working. So if you have fixed the tv on the place then you may have difficulty to move it to another place.
For that, you can use an extension cord to connect the TV to the new outlet. This allows you to test the outlet without going through the hassle of moving the TV and moving it from a fixed location.
If you use a power surge protector for extra protection of the tv. Sometimes the protector is provided with a switch to turn it on and off. So check that this switch is on and all the devices connected to it are also working.
You can also try bypassing the surge protector and plugging the TV’s mains plug directly into a wall socket. If that doesn’t work, try connecting to another outlet in the house.
Contact TCL Customer Service
If the tv still doesn’t turn on after all the above solutions then you should consider contacting TCL customer service. You should consider the warranty of your TCL TV. If your product is under warranty then your work will be done without any charge for it.
You can call TCL Company at its toll-free number at 1-877-300-8837 anytime from 6:00 a.m. to 12:00 p.m. EST Monday through Friday, and 9:00 a.m. to 6:00 p.m. on Saturday and Sunday. Can call by EST.
Buying a New TCL TV
If you get tired of trying all the above and are unable to turn on the TV, then you should finally consider buying a new TV. TCL Company has many options available for size, quality, and price that every customer can afford. We have given you one such option.
Most Commonly Asked Questions
Why Is the Screen of Death Black on My TCL TV?
One of the best ways to fix a black screen is to restart your TV. If this doesn’t work for you, check for loose connections. If the HDMI cable is not working, replace it with a new cable. A software update can also help resolve the black screen on your TCL TV.
Why Is My TCL Android TV Not Turning On?
If you are worried about your TCL TV not turning on. So check that all the cords connected to the TV are properly fixed or not. If not then fix it properly. Now unplug your tv and hold the power button for at least 2 minutes. Now plug in the tv and check. If this also doesn’t work, press the reset button on the back of the TV.
Why Won’t My Roku TV Turn on but the Red Light Is On?
A red light is displayed means your Roku has insufficient power. To fix this problem first, make sure you are using the USB cable that came with your Roku, as others may not be suitable. After that, either try a different USB port or plug it into a wall outlet with a power adapter.
Like this post? You May Also Enjoy Reading:
Suggested Read –
- Does Roku TV Have Bluetooth?
- Panasonic TV Red Light Blinking
- Fixed: Vizio Sound Bar Not Working
- How to Charge AirPods Without Case?
- Hulu Keeps Crashing? | Here’s How to Fix It!