Xfinity Gateway Blinking Orange | Here’s How to Fix It

Xfinity Gateway Blinking Orange

Xfinity routers come with different indicator lights, which indicate the device’s status. For example, a steady white light means that your router is running, and a steady red light means that your device does not have an internet connection. What does the Xfinity gateway blinking orange mean?

Your Xfinity Gateway blinking orange light blinks, indicating that it is undergoing a firmware update. Wait for some time, and the upgrade should finish successfully. If your Xfinity Gateway continues to show an orange light after some time, then wait a minute and plug it back in to reset the device.

If you don’t know what to do on an Xfinity gateway when the orange light blinks, here’s some troubleshooting. If the orange light blinks in the router, then wait for some time. If the network does not come, then restart the gateway.

A blinking orange light on your Comcast Xfinity modem or router usually indicates that an update is in progress.

The Wait for the Upgrade Is Over:

Xfinity gateway blinking orange light means that the device should update its firmware. To further ensure the other functions of your router, it is necessary to upgrade the gateway software. This update fixes other issues with your device. In addition, the Xfinity gateway will automatically connect to the Xfinity server when updates are available.

Whenever the orange light comes on in your router, then nothing to worry about. Just wait for some time. But at the time of upgrade, keep in mind that does not stop the router in the middle. This may damage the router. It is necessary to update your software whenever orange light appears. After some time, the router will start working properly.

Suggested ReadXfinity Modem Blinking Green | Here’s How to Fix It

Reset the Router:

Reset the Router

If your Xfinity gateway still blinks orange light, restarting the device may help to troubleshoot the issue. You can restart the router by removing the power cable or by using the reset button. Some steps are given below. Use it.

  • First of all, turn off your computer.
  • Disconnect all devices from the router.
  • Remove the power cable from the router.
  • Wait for some time.
  • Reconnect the power cable to the router.
  • Wait for the router to turn on.
  • Check the status of sub-lights that they are on online.
  • Turn on your computer.

Some routers have a reset button that you can use to force restart your device. Some steps regarding this are given below.

  • First, turn off all the devices that are connected to the router.
  • There will be a reset button on the back of the router.
  • Press and hold the reset button with a pin or a sharp object for a while.
  • Wait till the device reboots.
  • Whether you come online or not, this light will blink and tell.
  • Turn on all the equipment connected to the router.

Check All Loose Cables:

Check All Loose Cables

Sometimes your router blinks orange light; then it could also be due to a loose cable. Or the cable wire can also be damaged whenever you get the wire connection loose, even while cleaning the router daily. Or even if you shift the router from one place to another, this can happen.

Sometimes the orange light blinks even due to cable abrasion or cut. For this problem, you have to take a simple solution. Do not use loose cables in the router. If a cable wire is loosely connected, you must fix it. Otherwise, you will have to change the cable wire directly. If you do this, then the orange light will not blink on your Xfinity router.

Suggested ReadVerizon Router White Light Blinking | How to Solve the Problem

Check the Splitter:

A splitter is a small device that transmits Internet signals to devices such as TVs and modems. This is a small but important part of the Xfinity gateway. The splitter is a common and small device, so many people ignore it.

If there is some problem with this, then the internet connection with the router will be loose, and the Xfinity gateway blinking orange light. The best way to do this is to change your splitter. So you should avoid using a splitter as it can weaken your signal. Apart from this, you plug the main internet cable into the router.

Check the Service Outages in Your Area:

Check the Service Outages in Your Area

If there is an internet network problem in your area, the router’s signal capability will be reduced or damaged, and you will not be able to connect to any device. Suddenly the disconnected router will start blinking orange light.

You should call your service provider and request to provide service in your area immediately. And if you have a smartphone, then through the Xfinity app, you can stop the interruption in service. Some points are given below, which will clear you.

  • Turn off your phone’s Wi-Fi signal.
  • If you have LTE data, then connect.
  • Install the Xfinity app on your phone. From Google play store.
  • After installing the Xfinity app, log in to your account.
  • Then check and report outages.
  • Navigate to My Network on the app to check the signal circle.

Suggested ReadTCL TV Light Blinking | Quick and Easy Solution

Use Ethernet Connection:

There may be a problem with a wireless network device near you, which may cause the router to disconnect from the network incorrectly. If this is the case, then this problem can be solved by connecting an Ethernet cable to the router. An Ethernet cable is included with most Xfinity gateway packages. Therefore, you do not need to buy an Ethernet cable separately. Some points are given below to see how to install an Ethernet cable.

  • Remove all cables and wires from the router.
  • Take an Ethernet cable and plug it into the end of the router.
  • Connect another wire modem.
  • Plug all wires back into their respective places.
  • Connect power outlets to Xfinity router and modem.
  • Check your internet connection.

Check What’s Wrong with the Xfinity Gateway:

If your Xfinity gateway blinks orange light even after all the efforts, then your router may be bad, not it. Older routers are not as efficient as newer models. Old router network may not give good. And soon, the router gets bad.

Sometimes there may be a reason for the router to disconnect. Somewhere the wire can come out of the cable can also be loose. Sometimes there may also be a signal issue in the area, and due to this, there is a network problem. The difference between the router and its connected device can also be a weak signal, or Xfinity Wi-Fi can be disconnected.

If the router is bad, then there is only one solution, change it and install a new model Xfinity router. You must check the warranty and network issues before buying a new router. You can buy a router from any good company. You can buy the router by talking about any dealer warranty offer.

Check the Requirement in the System:

If you have just got a new Xfinity gateway, and after setting the light blinks, then check whether your operating system operates on the new system or not. Different Xfinity routers have different minimum system requirements. The most basic include needs.

Mainstream Microsoft and Apple supported OS in the operating system. And Ethernet cables connect to cat5e and cat6e. The processor also has Intel Core-like. If you use a browser, then there should be Chrome, Firefox, and any internet-connected app. If your router does not meet these requirements, it may not work properly or otherwise.

Suggested ReadHow to Connect Vizio TV to WIFI Without Remote?

How to Activate Your Xfinity Gateway?

First, download and install the Xfinity gateway app from the play store. To use the app, start by entering the id password in the account. Then your Xfinity gateway app will be enabled to work. With this, you can get any information related to your router. Also, using this app, you can contact Xfinity customers. There are many benefits to using this app.

Contact Xfinity System:

Contact Xfinity System

If your Xfinity gateway device seems to be your solution, consider contacting Xfinity customer support to assist you. Xfinity customers come home to serve you. When their router is not working properly. Then it is necessary to call the Xfinity customer. The Xfinity customer is available online for your service 24 hours a day.

Your complaint will be investigated by Xfinity customers, and they will see if there is any service interruption in your area. There is no network issue somewhere. And if so, he will guide you through setting up your router correctly. The company sends a technician from the residence office to fix your problem. That technician comes to your home and checks your router, and fixes it.

Most Commonly Asked Questions:

Most Commonly Asked Questions

Why Does My Xfinity Router Blinking Orange?

When your Xfinity router blinks orange, so in simple language, it means that your device is taking a long time to connect to the internet. However, continuous blinking means your connection is not ideal, or it is struggling to make a smooth WiFi connection.

Why Won’t My Xfinity Modem Stop Blinking Orange?

When your router undergoes a firmware update, then the Xfinity Gateway blinks orange. If this doesn’t work, you can try rebooting your router. Check the cable connected to your router or use an Ethernet connection. If your problem persists, contact support or consider replacing your router.

How Do I Fix the Orange Light on My Router?

To fix this problem, all you have to do is unplug the router from its power source and leave it for at least 30 to 50 seconds, then plug it back in. Now, if the color of your router turns from orange light to white, it means that your problem is fixed.

How Do I Reset My Xfinity Gateway?

Locate the reset button on the back of your gateway and use a non-metallic pointed object (such as a toothpick) to hold the reset button until all the LEDs turn off. If your reset is unavailable, then find the WPS button and hold it for at least 30 to 50 seconds.

Why Won’t My Xfi Gateway Connect?

If you are also facing wifi connectivity problem. You can then restart your gateway from the Xfinity app, the xFi website, and the Overview tab of the Xfinity app on the X1. In the Xfinity app, scroll down to Connection Trouble and select Restart Gateway. On the xFi website, scroll down to Troubleshoot and select Restart.

Like this post? Could you share it with your friends?

Suggested Read –

Conclusion:

If your Xfinity router is constantly blinking orange, it can cause a lot of disruption to the user. Here we have many solutions for your convenience which can help you with this problem.

  • Wait for the Upgrade to End.
  • Reset the router.
  • Check All Loose Cables.
  • Check the Splitter.
  • Check the Service Outages in Your Area.
  • Use an Ethernet connection.
  • Check What’s Wrong with the Xfinity Gateway.
  • Check the Requirement in the System.
  • How to Activate Your Xfinity Gateway.
  • Contact Xfinity System.

These solutions will help you in your Xfinity Gateway Blinking Orange problem. So you tell us through comment which solution got rid of your problem.

James Roche

James Roche is a writer, editor, and fact checker who has worked in the publishing industry for over 12 years. He has worked on both the editorial and production side of the business and has experience with both traditional and digital publishing.

Leave a Comment