Top 5 Ways to Reconnect Ring to WIFI

How to Reconnect Ring Doorbell to Wi-Fi

No Ring device near you or at home will work without an internet connection. Almost everything you can adjust over an internet connection to facilitate the transfer of information from your Device to a mobile phone. If the Wi-Fi connection on a Ring device stops working, you can reconnect to it without any problems and get your identity back to normal.

Ring Doorbell is a multifunctional smart home appliance that works as a video interface system. The doorbell lets you talk to your innermost via video call using a mobile or tablet. This smart doorbell comes with its own app. And it can be easily connected to Wi-Fi.

The Ring device itself connects to your router via a Wi-Fi wireless network. All the members of the household can also use this signal. You must use your phone to connect the Ring device. The probability button depends on which Ring device we use.

Select the doorbell or security camera you need to reconnect to wifi. The next screen should be the Device Dashboard. Tap on Device Health. Tap on Reconnect to Wifi or Change Wifi Network.

To connect the Ring device to Wi-Fi, open the app, go to the settings, and use the steps given below.

  • First, open the Ring app.
  • Then click on the menu button on the top left-hand side.
  • Select Devices.
  • Select the Device you are trying to reconnect to.
  • Choose a good device.
  • Then reconnect to Wi-Fi.

Once the Ring device is reconnected, test it again. Check that it is well connected to the router and the wireless connection to the Ring device so that you can follow the next steps. If our network strength issues, then the Ring device can’t connect; for this, you have to fix your Wi-Fi network setting after that Ring device is connected.

Suggested ReadParamount Plus Keeps Buffering? | Here’s How to Fix It!

How to Reconnect the Ring to Wi-Fi?

One of the best ways to establish a seamless Wi-Fi connection. To reconnect your Ring to your router, In most cases, a problem with the network is preventing the Ring from connecting to Wi-Fi.

You can use the following steps to reconnect your device:

Check Your Network

Check Your Network

In most cases, a poor network connection can interrupt the service of your Ring Doorbell. In such a case, it becomes very important to check the condition of the router’s network.

First, you disconnect the doorbell. Now try to connect your smartphone to your Wi-Fi network. If your phone connects seamlessly, your network is in normal condition. After this, you can reconnect your ring doorbell.

Change the Password

Even if you have changed your Wi-Fi password for some unknown reason, your Ring device will not be able to connect to it. Even if you have already connected this device, you will need to reconnect it. In such a case, you need to reconnect it to your router manually. You have to open the Ring Doorbell app enter your new Wi-Fi password and manually reconnect the device.

Reset the Router and Modem

Reset the Router and Modem

If you’re having trouble connecting a Ring device. If the Device is not connecting, then reconnect your modem or router. Reconnecting the modem or router will bring the network to the Ring device.

  • Unplug your router or modem.
  • You can completely disconnect the router.
  • After unplugging the Ring device, wait for some time.
  • Plug the router into the wall.
  • Wait for all the lights to come on.
  • Give it a few minutes.
  • Before connecting the router, ensure it is completely in the network.
  • After all the lights come on, plug the router back in so that you can tell that the signal is coming.
  • Use a computer or mobile to check that your download or upload is correct.

If your Wi-Fi speed is too low, the Ring device will not work properly. Ring recommends downloading or uploading at least 2MB of data for the Device to turn on. You cannot always get the network at the same speed.

Suggested ReadInsignia TV Won’t Turn On | Troubleshooting Tips and Tricks

Check Your Ring Device Battery

A low battery level from the doorbell or Wi-Fi can also cause the connection to fail. Ring devices are not always hardwired into our home power network. The router shuts down after the power goes out, and the Ring device may get disconnected due to a low battery.

The ring disconnects due to no wireless connection power. You can check the battery life of your Ring device. Be sure to press the button to update battery life before checking if you’re using a Ring doorbell. Some steps are given below, by seeing which you can check the battery of the Ring device.

  • First, open the Ring device app.
  • Then click on the menu button on the top left-hand side.
  • Afterward, tap on Device.
  • Select the Device you are using.
  • Then check the battery level.
  • Check how much battery is left.

If the battery is low, then it is necessary to recharge it. The Ring device will connect to Wi-Fi only if the Ring device’s battery is charged. Wi-Fi or router connection is required for battery charge.

Check the Device Power Supply

Check the Device Power Supply

If your ring doorbell is hardwired and directly powered. So you need to check its power supply again. If your Ring doorbell doesn’t get constant power, it won’t be able to connect to the router.

In the case of a hardwired doorbell, you can take the following steps

  • First of all, you open the Ring Smart app on your mobile.
  • Now click on the three lines at the top left of your screen.
  • From here, navigate to the “Devices” option.
  • Select “Devices” and select Ring Doorbell.
  • Then click on the “Device Health” button found on the screen.
  • Now you need to check the power status. It shows the status of the power supply.

Suggested Read: Firestick Won’t Turn on | 7 Ways to Fix

How to Change Wi-Fi Connection on Ring Doorbell?

If you want to reconnect the Ring device to a Wi-Fi-like wireless connection, then it is very easy. Just like we have seen how to reconnect the Ring device to Wi-Fi, let’s see step by step how to reconnect the Ring doorbell to Wi-Fi. Below are some easy steps to follow.

  • First, open the Ring app.
  • Then click on the menu button on the top left-hand side.
  • Select Devices.
  • Select the Device you are trying to reconnect to.
  • Choose a good device.
  • Then choose this option to change the Wi-Fi network.
  • Then go to the Ring Doorbell option.
  • If necessary, the faceplate should be removed.
  • Which doorbell you have, depends on how to set it up because the setup of each doorbell is different.
  • Press and hold the button until you go to Ring Doorbell setup mode.
  • Open a Wi-Fi wireless network on your phone.
  • Select the network you want to list. It will be visible only during the setting.
  • Then continue it.
  • If you follow all these steps, then perfect Wi-Fi will be connected.

Your Ring Doorbell will now be connected to the network you have set up. Whereas he used to use Ring Doorbell earlier as well. You have to use the compulsory setup process; there is no other option. Changing the setup of most Ring doorbells is a bit tricky as the faceplate has to be removed. That’s why you should make sure to use the right screwdriver.

Ring Device Wi-Fi Troubleshooting

While you can’t connect to a wireless network on your Ring device, there is a wireless connection that you can connect to other things in your home. You can use any Wi-Fi wireless connection.

Just make sure that the wireless network is the best while using it. Any wireless connection Ring device is not that simple to set up. Its setup requires a wireless connection like Wi-Fi.

Charge Your Doorbell

You must always keep the ring weak-charged. If the ring device is charged, then Vo-fi or router connection will be an easy working progress. You can first check the battery charge of your Ring Doorbell and connect the battery-powered Ring Doorbell to Wi-Fi or Router.

First, it is necessary to install your router in one place. It helps you to know whether the end stand is stable enough or not.

Install Your Doorbell

First, you fix your Ring Doorbell in one place. Then connect to a wireless connection such as Wi-Fi and keep it in one place. From where the network speed is good. The Ring Doorbell must be charged. It is necessary to keep the Ring device in one place.

Suggested ReadVerizon Router White Light Blinking | How to Solve the Problem

Check Your Wireless Network Type

Sometimes it happens that our router is more network 5GHz, and the ring devices always use less network like 2.4GHz. This could be the reason why the Ring device is not connecting. A network switch must be installed when you change the Ring device.

Change Your Configuration

Change Your Configuration

There can be many such things that do not get the signal that all the things should be in place in your house; if the ring device is away from the router and the network speed is not good, then it may be that the ring device is bad. Therefore, ensure that the ring device and the router are well connected and that there is no network issue.

Another issue is that some physical obstacles can prevent the signal from getting between the ring device and the router. For example, wood or metal to which many materials are connected to the wall; due to this, the network of the router can be weak. If all these things are between the router and the ring device, then you should change the location of your router.

Add a Signal Boost

If you have moved all the things here and there in your house. You have also reset the router. Still, you are not getting a good signal; then you try to add a signal boost to the router. You can use a mesh router which can get network all around and in a similar way. It can get you better wireless signals in places where you couldn’t before.

Poor Wi-Fi connection

Ring device won’t work properly if your Wi-Fi connection doesn’t get to the network fast. A bad connection or poor connection can also damage the router. In this case, you must keep the router and ring device inside. Keep this thing in mind that old routers are weak in terms of network speed. If possible, use the new model router only for the ring device.

Suggested Read: Do Vizio Tvs Have Bluetooth? | A Comprehensive Guide

Frequently Asked Questions

Most Commonly Asked Questions

Why Is My Ring Not Connecting to Wi-Fi?

You check whether the problem is only in the ring or whether other devices are also not connecting to your Wi-Fi. If you are having this problem, unplug your router leave it unplugged for at least 30 to 50 seconds, and then plug it back in. Check if your Ring Doorbell automatically reconnects. Turn off the power to your Ring Pro in the circuit breaker box for 30 to 40 seconds, then turn it back on.

How Do I Reset My Ring Camera Wi-Fi?

Ring Spotlight Cam Battery

  • Find the setup button at the top of the camera.
  • Press and hold the setup button for at least 10 to 20 seconds.
  • The light on the front of the camera will flash for a few minutes; When the light turns off, the reset is complete, and you are now ready to use it.

Where Is Reconnecting to Wi-Fi on the Ring App?

To reconnect the Ring to Wi-Fi, open the app and adjust the settings there.

  • First, open the Ring app.
  • Then click on the menu button at the top left.
  • Select devices.
  • Select the device you are trying to reconnect.
  • Choose a good device.
  • Then select this option to change the Wi-Fi network.
  • Then go to the Ring Doorbell option.
  • If necessary, the faceplate should be removed.
  • It depends on which doorbell you have and how to set it up, as each doorbell is set up differently.
  • Hold the button down until you get to the Ring Doorbell setup mode.
  • Open a Wi-Fi wireless network on your phone.
  • Select the network you want to list. It will only appear during the setting.
  • Then continue it.

How Do I Reconnect My Ring Doorbell to Wi-Fi Manually?

To reconnect your Ring device to Wi-Fi, you need to take the following steps:

  • Tap on the menu icon in the upper left corner.
  • Tap Devices.
  • Select the video doorbell or security camera you need to reconnect to Wi-Fi.
  • Tap on Device Health.
  • Tap Reconnect to Wi-Fi or Change Wi-Fi Network.

How Do I Reboot My Ring Doorbell?

To hard reset your Ring doorbell, press and hold the orange button for at least 20 to 30 seconds. After releasing this button, the front light will flash briefly, indicating that your ring doorbell is restarting. This process may take up to 1 to 2 minutes to complete.

Like this post? Could you share it with your friends?

Suggested Read –

Conclusion

If you have used all the methods above and still the Ring device is not connecting to Wi-Fi, then you will have to call an engineer. To see what the problem is. It can also be due to software or hardware. It could also be due to power or network issues.

You can connect with Ring customer care service and seek special attention in this matter. Ring devices require a strong network. That’s why it is important to keep the router and ring device inside.

James Roche

James Roche is a writer, editor, and fact checker who has worked in the publishing industry for over 12 years. He has worked on both the editorial and production side of the business and has experience with both traditional and digital publishing.

Leave a Comment