Vizio TV Not Turning On?: 8 Steps to Fix It

Q: How Do You Fix Your Vizio TV When It doesn't Turn On?

Power cycle your Vizio TV: First, disconnect your TV cord from the mains plug, and leave it alone. Now you have to find the power button on the TV and hold it for at least 30 to 50 sec. Doing this will also drain the remaining power in the TV. Now reconnect the tv cord and turn on your Vizio tv.

Q: What Is Vizio Black Screen of Death?

The reason behind Vizio tv black screen: There are many root causes for a television screen suddenly going dead, but one of the most common causes is a failure in one of the power supply boards. Television may have one or more power supply boards in addition to a T-con board and several other internal components.

Q: Is There a Reset Button on a Vizio TV?

You can also reset your Vizio TV using the remote. For this, press the menu button on the remote. Use the arrow buttons on the remote to highlight the System and press OK. Then highlight Reset and Admin and press OK. Highlight Reset TV to factory defaults and press O.

In today’s lifestyle, the use of TV for entertainment has increased a lot. Vizio Smart TV is in that too. But sometimes we turn on our Vizio TV, but Vizio TV is not turning on, then there may be some problem with our TV. Otherwise, the problem may also occur due to the wrong connection of the TV. If our Vizio TV is not showing red power and we do not see the light after turning on the TV. This could be due to the wrong cord or the remote of the TV. A faulty power board could also cause Vizio TV. All brands are available in the market, but Vizio Smart TV is a very good model.

Vizio TV works great. Vizio TV offers 4K resolution. But sometimes Vizio TV does not turn on due to some reason or problem. Vizio TV was running fine, but suddenly the TV stopped. So once plug out the Vizio TV from the wall-mounted power board and wait for some time, plugin again. There are many reasons are Vizio TV to turn off. So we have to factory reset the TV one more time. Or we have to check the remote control of Vizio TV as well.

If your tv does not turn on even after power cycling, then you can also choose the factory reset option. Also, inspect the remote control for faults. It is also necessary to inspect the power cord for any naked-eye damage.

Quick Navigation

Check Out Vizio Remote Control
Most Commonly Asked Questions:

Check Out Vizio Remote Control

TV remote control can be a common but very important problem behind TV not turning on. A bad TV remote control can also cause the TV not to turn on. First, we need to check the battery level of the remote control. To check the voltage of the battery, we have to use a voltmeter. We can repair the remote ourselves. If we don’t have a voltmeter, then we have to replace the battery. It helps to fix bugs in the TV system.

Suggested Read: Vizio Smartcast Not Working? | Try These Fixes!

Unplug the Vizio TV First and Plug It Back In

One of the reasons why Vizio TV won’t turn on could be a loosely connected power cable. Due to a faulty power cable on our Vizio TV, we need to unplug the device from the power source. And after waiting for some time, it will have to be plugged in again. We should check if the cable is easily plugged into the power board. Because even due to loose connection the TV does not turn on.

Try a Different Electrical Outlet

TV does not turn on even after properly plugging the cable into the power board. So it may be that the power board of our TV is bad. A faulty outlet will not provide enough power to turn on the TV. Then we have to think about new electrical outlets. We have to remove the power board first and install a new power outlet. And then you have to plug in the TV cable to see if the TV is on.

It Is Important to Check the Power Cord

One of the reasons why Vizio TV won’t turn on can be a faulty power cord. First, we need to unplug the power cable connected to the TV. We have to leave the power cable unplugged for a while and then plug it back in. Whenever we plug the power cable back in, it is essential to check if the connection is made properly.

Suggested Read: Do Vizio Tvs Have Bluetooth? | A Comprehensive Guide

It should not be loose at all. The TV needs a tight connection to get stable power. After plugging the power cord back in, use the Vizio TV’s power button, not the TV remote, to turn on the TV.

Power Cycle Your Vizio TV

Power cycling is a very simple process, so it easily solves the problem of software and device booting up. Works for power cycling TVs too. Below are some steps that are described on how to power cycle on Vizio TV.

First of all, Turn on the button by plugging the Vizio TV into the power board.
Before you begin power cycling, ensure the Vizio TV is not in standby mode.
Afterward, the TV will have a red LED on when the TV is in standby mode.
Then unplug the outlet cable from the power board.
Then wait for at least 5 minutes.
Then the TV needs to be turned on by plugging the cable into the power board.

In this way, power cycling will be completed.

How to Choose the Right Input Source?

Sometimes our VizioTV is not turned on due to wrong input sources. We need to choose a suitable input source for our VizioTV to work properly. If we are using a streaming device DVD player or using a cable box, we have to check that our TV’s input source and TV-link HDMI ports match each other. How to turn the TV into HDMI 2 is described in the steps below.

Method 1 – How to Enable Input Sources Using Remote Control

First, plug the Vizio TV into the power board and turn on the button
Then select the source button on the TV remote control.
Then select the desired input mode.

Method 2 – How to Change the Input Source Without Remote Control

First, plug Vizio TV into the power board and turn on the button.
Then, press the menu button using the volume keys on your VizioTV.
Next, go to the source option. For this, you have to use the volume button.
Then select the desired input source. To do this, press the menu button.

Note: Some Vizio smart TVs have a source button on the back or edge. Which we can use to select input sources on our TV.

Suggested Read: Where Is Power Button on Vizio TV? | The Definitive Guide

Factory Reset Vizio TV with Remote

One of the reasons why Vizio TV won’t turn on could be a loosely connected power cable. If plugging in and unplugging the Vizio TV doesn’t solve the problem, the best option is to factory reset the Vizio TV. If we use the factory reset option, the saved information and data are also deleted. It is also possible to restart Vizio Smart TV. Below are some steps by using which we can factory reset Vizio TV.

First of all, Turn on the button by plugging the Vizio TV into the power board.
Then press the Home button on your Vizio TV remote.
Select the Settings button on your TV.
Then select the “General” option.
After that, go to the reset icon.
Then we need to enter our safety pin (by default, it’s “0000”).
Our Vizio TV will turn off as soon as it is powered on and show the initial setup screen.

Factory Reset Vizio TV Without Remote

What to do if, for some reason, our Remote gets damaged or the remote doesn’t work? So in Smart TV, we can factory reset Vizio TV even without a remote. To factory reset the Vizio TV without a remote. First of all, we have to find the Power button of the TV and turn it on the Power button of the TV.
We can perform a factory reset using some of the steps given below.

First of all, turn on Vizio TV.
Then select the Menu button icon on the Vizio TV.
Select the setting for the button on your TV.
Then select the “General” option.
After that, go to the reset icon.

This is how we can factory reset our Vizio TV. If we have trouble finding all these buttons on the TV, we can use another method. We can do a factory reset by connecting the TV to a USB keyboard. First, plug the USB keyboard into the socket on the back of your Vizio TV. After that, we can navigate, or factory reset our Vizio TV by using a USB keyboard.

There are many more options to reset the TV; One of them is that we can connect the smartphone to our smart TV, so we have to download the Vizio SmartThings app on our smartphone. And using it as a TV remote, you can do a factory reset on Vizio Smart TV. Another possibility is that we need to use a universal remote we have and enter the appropriate Vizio code.

Suggested Read: Vizio Sound Bar Not Working | Here’s How to Fix It

Call a Technician

There may be some problems that we do not solve at the primary level. In such times we need a technician to fix the TV. In such a situation, it would be right for us to take the help of a technician. We’ll have to call to get the technician in, which will help us in less time. And knowing what’s wrong with our Vizio TVs, we find ways to fix it. Only a good and experienced technician can fix a Vizio TV. Can replace the required component installed in the TV. And helps to restart the TV.

Contact Vizio Support System

We can contact Vizio Support System via text mail or online. We can contact Vizio Support by dialing a toll-free number.

Power Button on a Vizio TV

Buttons are included in all Vizio TVs available in the market. But those undiscovered places can be that. You’ll usually find this button on the back of the TV in the bottom right or bottom left corner.

Vizio TV Not Turning on but the Light Is on

Suggested Read: How to Connect Vizio TV to Wifi Without Remote [Solved]

Vizio TV won’t Turn on with the Remote

The most common problem is that the battery in the remote is dead or already dead. In such case, you replace the battery and try to turn on the tv again. If the problem still persists, remove the battery from the remote and press and hold the power button on your Remote for 15 seconds.

Vizio TV won’t Come on

Power cycle your Vizio TV

First, disconnect your TV cord from the mains plug, and leave it alone.
Now you have to find the power button on the TV and hold it for at least 30 to 50 sec. Doing this will also drain the remaining power in the TV.
Now reconnect the tv cord and turn on your Vizio tv.

Power Button on Vizio Smart TV

My Vizio TV won’t Turn on

Most Commonly Asked Questions:

How Do You Fix Your Vizio TV When It Doesn’t Turn On?

Power cycle your Vizio TV:

First, disconnect your TV cord from the mains plug, and leave it alone.
Now you have to find the power button on the TV and hold it for at least 30 to 50 sec. Doing this will also drain the remaining power in the TV.
Now reconnect the tv cord and turn on your Vizio tv.

What Is Vizio Black Screen of Death?

The reason behind Vizio tv black screen:

There are many root causes for a television screen suddenly going dead, but one of the most common causes is a failure in one of the power supply boards. Television may have one or more power supply boards in addition to a T-con board and several other internal components.

Is There a Reset Button on a Vizio TV?

You can also reset your Vizio TV using the Remote. For this, press the menu button on the Remote. Use the arrow buttons on the remote to highlight the System and press OK. Then highlight Reset and Admin and press OK. Highlight Reset TV to factory defaults and press O.

Why Won’t My TV Turn on but Have Power?

Disconnect the tv from your mains plug. Press the power button on the TV for at least 30 to 50 seconds while it is unplugged. Once this time is up, release the button and plug the TV back in. Power up the unit and see if you can see an image.

Like this post? Could you share it with your friends?