Top 6 Solutions To Fix Vizio TV Sound but No Picture

Q: Why Is My TV Sound Working but No Picture?

Check the HDMI cable If there is a problem with your HDMI cable, it can disrupt the video signal. When the audio works properly. There are two main reasons for such failure. Input sockets and cables. First, unplug and reconnect each HDMI cable at both ends, the TV end, and the other connected device.

Vizio TVs are eminent for fabulous picture and sound quality. Vizio TVs can in some cases encounter specialized issues that can influence their execution. in the event that you’re encountering sound but no picture on Vizio TV, it can create a disappointing and befuddling encounter. There are a few fundamental investigating steps merely can perform to settle the issue.

In this post, we’ll go over the foremost common causes of why your Vizio TV is showing sound but no picture and provide a few arrangements to assist you in getting your TV back up and operating.

Suggested Read: Top 7 Solutions to Fix Sound but No Picture on TV

Vizio TV Sound but No Picture

If your TV has sound but you can’t see a picture, you may need to soft reset it. First of all, unplug your TV and wait for at least 1 to 2 minutes. During this time, hold down the power button of the TV for at least 30 to 50 seconds. Now plug the TV back in and turn it on.

Common Reasons for Vizio TV Sound But No Picture

Check the Connection: The primary thing to check is the association on your Vizio TV. Make beyond any doubt all cables safely stopped into both the TV and any outside gadgets, such as cable boxes, DVD players, or amusement supports. In the event that you see any free associations, attempt unplugging the cable and stopping it back in.

Inspect Input: Make sure that the TV is set to the right channel or mode. If you are operating something like a cable box or DVD player, make sure the TV is set to the right input for that thing. You can do this by pressing the “Input” switch on your remote control and choosing the right input option.

Check Power: Make sure the TV and any other appliances are connected and switched on. If your power goes out, your TV might play sound but not show any pictures.

Firmware Updates: Vizio TVs sometimes get updates that can resolve problems and make them work better. Make sure to check if there are any updates for your TV. If there are updates open, install them if needed.

Suggested Read: Where Is Power Button on Vizio TV?: Find out Here

Vizio TV Screen Goes Black but Sound Still Works

If you tried to improve the sound but did not get any pictures on your Vizio TV. There could be other problems that we need to look into. There are some causes why this problem often occurs and how you can solve it.

Broken Screen

If your Vizio TV is making noise but you can’t see anything on the screen, it might be because the screen is damaged or not working. This can happen if the TV is accidentally dropped or gets hit by something. Sadly, if this is true, the only fix is to get a new screen, which might be expensive.

Defective Backlight

If the light behind your Vizio TV is not working correctly, it can make the screen show a black or gray picture with sound. This usually happens because of a broken strip of LEDs or the power supply board.

You can usually inform if the backlight is the problem by shining a small light on the screen and checking for any dim pictures. If you notice pictures on the screen, then the backlight is probably causing the issue. To solve this problem, you might have to change the LED lights or the part that provides power.

Suggested Read: Top 9 Solutions To Fix Vizio TV Turning on by Itself

Check Power Supply

If the power supply on your Vizio TV is not working right, it can make the TV play sound but not show any pictures. This usually happens because of a damaged capacitor or other parts on the power supply board. To crack this issue, you might have to change the power supply board.

Check for Loose or Damaged Cables

The ribbon cable is a thin, flat cable that links the mainboard of the TV to the screen. If the cord is not connected correctly or broken, the TV may have sound but no picture.

To solve this problem, you might have to open the TV and look at the cable to see if it is broken or not properly connected. You may have to get a new one if it is broken.

Defective Mainboard

If the mainboard your Vizio TV that controls everything is not working right, it can make the TV play sound but not show any picture. This can happen because of a broken part in the board or other problems like the software getting messed up. To crack this issue, you might have to change the mainboard.

Suggested Read: Do Vizio TVs Have Bluetooth?: A Comprehensive Guide

Check HDMI Cables

If you are using HDMI cables to connect things like game consoles or DVD players to your Vizio TV, it’s really important to make sure the cables work well with your TV.

Using HDMI cables that are not compatible can cause problems with the television’s screen, leading to hearing sound but not seeing any picture. Make sure to use HDMI cables that work with your TV and other devices.

Problem-Solving Every Point

Change Screen

If your Vizio TV screen is damaged, the only thing you can do is get a new one. This repair can be expensive. Or it might not be worth it to fix if the TV is old or if the cost of the repair is higher than the TV’s worth.

Replace LED Strip or Power Board

If your Vizio TV’s light behind the screen is not working well, you might have to change the strip of lights or the board that powers the TV. These fixes might be difficult and need to be carried out by an expert.

Suggested Read: Vizio TV Not Turning On?: 8 Steps to Fix It

Electrical Board Replacement

If the power source on your Vizio TV is not operating correctly, you might have to change the power supply board. You need to reach out to an expert for this task.

Check Damaged Cables

If the thin flat cable on your Vizio TV is not properly attached or broken, you might have to open the TV and see if it’s damaged or not attached securely. An expert should fix and change the broken part.

Check Faulty Mainboard

If the mainboard on your Vizio TV is not working right, you might have to get a new one. Get assistance from an expert.

HDMI Cables

If you are using HDMI cables to connect things to your Vizio TV, make sure you use cables that will work with your TV and the things you are connecting. This can help stop problems with the TV screen.

Suggested Read: Top 7 Solutions To Fix Vizio TV Sound Not Working?

Contact Vizio Support

If you are still having problems with your Vizio TV, get in touch with Vizio customer support to get help. They might be able to give more steps to fix the problem or suggest a professional to help fix it.

Better Understanding Watch This Video

Frequently Asked Questions

Why Is My Vizio TV Black Screen but Has Sound?

If your tv has sound but you can’t see the picture then you may need to soft reset it.

Follow the steps below to perform a soft reset.

First of all, unplug your TV and wait for at least 1 to 2 minutes.
During this time, press and hold the power button of the TV for at least 30 to 50 seconds.
Now plug the TV back in and turn it on.

Why Is My TV Sound Working but No Picture?

Check the HDMI cable

If there is a problem with your HDMI cable, it can disrupt the video signal. When the audio works properly. There are two main reasons for such failure. Input sockets and cables. First, unplug and reconnect each HDMI cable at both ends, the TV end, and the other connected device.

Why Is My TV Screen Black but the Sound Is Still On?

There is sound on your TV but the black screen you see may be due to a problem with the input source of the TV. Check all input devices to check the input source and make sure all cables are properly connected to the TV. Take one device and connect it to another port to see if it works.

Why Can’t I See My Vizio TV Screen?

Often when you don’t see a picture, the reason for that could be that the TV is off. To determine if this is a display problem or a power problem, check your TV’s power light, it will probably be in the middle, on the left side of your TV. If the light is coming – so is the TV.

Like this post? Could you share it with your friends?

Conclusion

If you can hear the sound but there is no picture on your Vizio TV, it can be annoying but don’t worry. It can usually be fixed by following some troubleshooting steps or getting it repaired. If your TV is not working properly, try these steps.

Make sure all the cords are connected accurately. Set the TV to the right source, update the TV’s software if needed, and fix common issues. Like a cracked screen, broken backlight, or damaged cables. If none of these steps work, contact Vizio customer support or professional repair service for help.